can anyone tell me if these are any good for light aluminum work as thay are much cheaper, sorry if this has bin gone over before i don't know how to searh forums:withstupi
http://cgi.ebay.com/20mm-CNC-Linear-...3%3A1|294%3A50
can anyone tell me if these are any good for light aluminum work as thay are much cheaper, sorry if this has bin gone over before i don't know how to searh forums:withstupi
http://cgi.ebay.com/20mm-CNC-Linear-...3%3A1|294%3A50
anyone please?
Depends on what they are mounted to. People have cut aluminum with mdf and skate bearing machines. If all you plan on cutting is aluminum, you'd probably be better off with THK type rails. But again, the rest of the machine is just as important.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
it's a jgro slowly being converted to all aluminum will these work for the y-axis (gantery) http://cgi.ebay.com/2-ABBA-Linear-Be...3A1%7C294%3A50 i'm looking to work with any thing but reel hard stuf but do not want to buy a mill.
yay the link worked
thank for fixing the other one.