i am having issues with my install. just installed a anilam 3300mk on my supermax ycm 40 mill. i cant get the spindle to start with the buttons on the controle. not in manual mode or auto. if i push in the relays the spindle runs.shouldn't i be able to run the spindle in manual? not to familer with this controle and i am learning as i go. thanks for any help.
Results 1 to 3 of 3
-
01-25-2009, 08:43 PM #1
Registered
- Join Date
- Oct 2007
- Posts
- 12
installing anilam 3300 on supermax mill.
-
05-02-2009, 04:46 AM #2
Registered
- Join Date
- Sep 2005
- Posts
- 23
The default rpm is set to zero. Push the period Button on the key pad. This will bring up the RPM screen. Enter the rpm, then push the spindle forward button. Without the RPM entered the spindle will not run.
-
05-02-2009, 05:09 AM #3
Registered
- Join Date
- Oct 2005
- Posts
- 1237
What'd you pay for that install. They quoted me USD$7k.
Reply With QuoteSimilar Threads
-
anilam 3300 mk hard drive died
By nealg in forum CNC (Mill / Lathe) Control Software (NC)Replies: 5Last Post: 11-19-2010, 06:50 PM -
Anilam 3300/5300 DNC errors and more (ethernet)
By rschader in forum DNC Problems and SolutionsReplies: 7Last Post: 11-18-2010, 07:58 PM -
anilam 3300 help
By ninja11zx in forum CNC Machine Related ElectronicsReplies: 2Last Post: 11-18-2010, 07:21 PM
Posting Permissions
