mill interior flourescent lights in the corners wont work. the workpiece lights work when doors are opened. the gfi at the rear of machine stays tripped and wont reset. can find anything in panel that needs reset. can i run a test or key something in to get them to work again. its a newer mill like a 30 h.p.
but ill have to get the model number if needed to help diagnose thanks.
Thread: no cell light
Results 1 to 3 of 3
-
02-04-2009, 01:39 PM #1
Registered
- Join Date
- Feb 2009
- Posts
- 2
no cell light
-
02-04-2009, 04:19 PM #2
Member
- Join Date
- Jan 2005
- Posts
- 15362
Hi gcbryant9116
There is a braker in the main electrical cabnet that must of tripped as wellMactec54
-
02-05-2009, 03:23 AM #3
Registered
- Join Date
- Feb 2009
- Posts
- 2
we looked for all possible breakers. no luck. we did see a magnetic breaker that was demagnetized but did not make a difference when we pushed it in.
Reply With QuoteSimilar Threads
-
a ring of 200 Led Lights to light up? light source render?
By Rich05 in forum SolidworksReplies: 6Last Post: 10-26-2008, 12:16 AM -
Spectra light and Light machine owners have ?
By ZipSnipe in forum Benchtop MachinesReplies: 11Last Post: 07-19-2008, 03:52 AM -
cell systems
By wesviddaurri in forum MetalWork DiscussionReplies: 0Last Post: 01-29-2008, 05:16 AM -
Machine Recommendations Please - Light Duty, Prototyping, Light Production in metal
By SCG11762 in forum Uncategorised MetalWorking MachinesReplies: 2Last Post: 08-27-2007, 02:08 PM -
Cell Manufacturing
By GOMEZ107 in forum Uncategorised MetalWorking MachinesReplies: 3Last Post: 05-26-2003, 12:59 PM
Posting Permissions
