[FPV_GTp]

CAD drawings of most popular V8 engine bellhousing patterns

Hi

Does anyone have CAD drawings of most popular engine bell housing patterns that you wouldn't mind sharing

Ford Modular V8 bellhousing patterns detailed drawings or dimensions ?
Ford 460 big Block ?
Ford 351 cleveland ?

chevrolet big block / small block ?

chrysler big block / small block ?

Even raw G-code would be fine.

would be greatly appreciated

cheers

[y.not]

hi, have chevy SB,BB drawings. will send to your email - just send me a link. radim [email protected]
p.s. have you found mopar bell pattern ? i can not find it anywhere .... thanks ....

[archangel]

Sad (being a Ford fan) that the only patterns we can find are the Chevy patterns.

I'm looking for the Ford small block and the Buick/Rover aluminum V8 patterns.

Add me to the list of those looking for bell housing patterns.

UPDATE!

Yesterday I put the measurements for the small block in AutoCad.

Now that I looked at the pictures of the 60 degree V6, small block and the big block V8 blueprints, they are showing the exact same measurements as the small block (the measurement were in a different order so they are not the same prints recopied).

Of the pictures that I have downloaded, were they mistakenly showing the small block rear prints mislabeled as the V6 and Big Block V8?

If so, I would like to get a copy of the Big Block V8 as well.

I will make a note of posting any others that I find here as well.

[archangel]

And a couple hours later I scored the Ford patterns on line!

I have them all posted here, but will e mail them to anyone interested if needed.

I have listed the Chevy and ford patters I have found so far.

http://s911.photobucket.com/home/archangel2003/index

[archangel]

How did you miss post number 4?

You were only post number 6, so the total before you posted was 5.

And a couple hours later I scored the Ford patterns on line!

I have them all posted here, but will e mail them to anyone interested if needed.

I have listed the Chevy and ford patters I have found so far.

http://s911.photobucket.com/home/archangel2003/index

The Photobucket link above still works as of 6:30 am 20 January 2010.

[heythere2581]

I would love to have those specs for the ford v6 duratec family of engines, does anyone have them or know where to get them, and some audi bellhousing patterns would be great as well.

[archangel]

I would love to have those specs for the ford v6 duratec family of engines, does anyone have them or know where to get them, and some audi bellhousing patterns would be great as well.

Check here.

They list some Audi and VW's

http://www.nexustech.ca/chimaera/Not...ine_Trans.html

[Flatoutservices]

Does anyone have the 392 Hemi bellhousing bolt pattern?

[tdigreg]

Hey archangel,
Could you send me the bellhousing blueprints for a 2003 4.6 V8. I want to be sure I have the right one. Thanks!

[Joe T.]

The 90° V6, SBC, and BBC have the same bellhousing pattern. The 2 Chevy V8's also shared the same flywheel pattern until 1985. The 85 and newer small block flywheel changed with the addition of the one piece rear seal. The 84 and older V6 may also have been the same but I never looked into it.

Great stuff. I actually measured a BBC head gasket to come up with the bolt pattern for a project I was working on. I was very close with my numbers. Wish I had found this thread before I started though.

[Remicon]

hey Guys
Can i get the SB/BB Ford Drawings
Thanks

[FPV_GTp]

LOL i'm a ford orientated person also most information is chevy chevy chevy !!!!! WOooooooooooooooooo this is great news some patterns starting to appear.


Does anyone have BIG BLOCK FORD ? bellhousing bolt pattern they want to share????


cheers

[freefuel]

I have both the small and big block Chrysler bellhousing drawings, plus the slant 6.

I also have a really fuzzy photo of an AMC V8 blueprint, but it is readable!

I also have some nice drawings of 4 and 5 cylinder Volkswagen TDI Diesels.

PM me your email address and I'll send them to anyone who wants them, I'm not interested it setting up a photo hosting account.

Lastly I'm searching for a BOP Buick/Olds/Pontiac/Cadillac bellhousing bolt pattern drawing.

P.S. I have a spread sheet listing a pattern for the Mercedes OM617 5 cylinder Diesel

[archangel]

freefuel
I PM'd you for the info.:stickpoke

[freefuel]

Does anyone have a drawing of the flywheel bolt patterns for the early and late model Chevy V8, and the AMC engines too?

[Lagun]

From FREEFUEL

[archangel]

I have the GM and Ford V8 patterns on my photo bucket account listed in this post.

Would you, or anyone you know, happen to have the Buick 215/Rover 3.5 bell housing pattern measurements?

[monc440]

I have both the small and big block Chrysler bellhousing drawings, plus the slant 6.

I also have a really fuzzy photo of an AMC V8 blueprint, but it is readable!

I also have some nice drawings of 4 and 5 cylinder Volkswagen TDI Diesels.

PM me your email address and I'll send them to anyone who wants them, I'm not interested it setting up a photo hosting account.

Lastly I'm searching for a BOP Buick/Olds/Pontiac/Cadillac bellhousing bolt pattern drawing.

P.S. I have a spread sheet listing a pattern for the Mercedes OM617 5 cylinder Diesel

I know this is an old post but I really need the Mopar bolt pattern.

Thanks for the help.

[archangel]

They all should be on my Photobucket, but I see some are missing.

The tower we use is infected and until it gets fixed, (a few weeks) I cant get to them.

Pictures by archangel2003 - Photobucket

I will post anything else I have when I can.

Also, can anyone who has blueprints also post them in photobucket and list the address here so we can all share?

[monc440]

They all should be on my Photobucket, but I see some are missing.

The tower we use is infected and until it gets fixed, (a few weeks) I cant get to them.

Pictures by archangel2003 - Photobucket

I will post anything else I have when I can.

Also, can anyone who has blueprints also post them in photobucket and list the address here so we can all share?

Angel

This is what I have - Early Chry, Dodge. Desoto, Hemi blocks 1951 to 1959.

I still need LA Mopar 273, 318, 340, & 360 bellhousing specs. Would also like big block 383, 400, 413, 426, & 440 bellhousing specs.

I think the Newer Dodge 4.7L bellhousing pattern is the same as the LA Mopar

Thanks