Can some body tell me the limitations of Dolphin Partmaster Demo version especially the Lathe Module?
Results 1 to 8 of 8
-
02-12-2009, 01:15 PM #1
Gold Member
- Join Date
- Apr 2006
- Posts
- 3498
Limitations of PartMaster Lathe Demo
http://free3dscans.blogspot.com/ http://my-woodcarving.blogspot.com/
http://my-diysolarwind.blogspot.com/
-
02-12-2009, 05:35 PM #2
Registered
- Join Date
- Nov 2008
- Posts
- 18
As far as I am aware it does everything other than generate the g-code.
If there is some function you need testing between full & demo let me know, I have the dongel version so can swap to demo very easily.
BR,
Windy.
-
02-12-2009, 05:36 PM #3
Registered
- Join Date
- Dec 2007
- Posts
- 496
Wont allow you to produce code.
-
02-13-2009, 06:39 AM #4
Company Representative
- Join Date
- May 2007
- Posts
- 428
Hi Khalid,
The demo has a few restrictions. Many of the help files, tutorials are not available because the download would be to large. The CAD system is fully functional. None of the post processors will be active, furthermore not allowing you to generate any G-Code. We can give temporary licenses however the tutorials will stil not be active unless you have the actual physical CD.Dolphin CAD/CAM Support
-
02-13-2009, 11:17 AM #5
Gold Member
- Join Date
- Apr 2006
- Posts
- 3498
Thanks Windy ...
Thanks for explaining, Dolphin USA ... Its really a professional software...
Best Regardshttp://free3dscans.blogspot.com/ http://my-woodcarving.blogspot.com/
http://my-diysolarwind.blogspot.com/
-
02-22-2009, 03:56 AM #6
Company Representative
- Join Date
- May 2007
- Posts
- 428
Thank you Khalid. Input is always appreciated.
Dolphin CAD/CAM Support
-
02-22-2009, 06:05 AM #7
Gold Member
- Join Date
- Apr 2006
- Posts
- 3498
I did used the 'Lathe' Module and it is really very systematic and userfreindly.... You can see my work at...
http://www.cnczone.com/forums/showth...=39588&page=40http://free3dscans.blogspot.com/ http://my-woodcarving.blogspot.com/
http://my-diysolarwind.blogspot.com/
-
02-22-2009, 09:10 PM #8
Registered
- Join Date
- Dec 2007
- Posts
- 496
Very nice work khalid.
Reply With QuoteSimilar Threads
-
WXP64 + partmaster = problems?
By Bruce Griffing in forum Dolphin CAD/CAMReplies: 2Last Post: 02-07-2009, 07:53 PM -
Partmaster CAM will not run? Help!
By Willyb in forum Dolphin CAD/CAMReplies: 11Last Post: 10-09-2007, 08:14 PM -
Dolphin Partmaster Level 3
By rodneydeeeee in forum Dolphin CAD/CAMReplies: 0Last Post: 12-01-2006, 09:24 PM -
Demo limitations ?
By Redline in forum Mach MillReplies: 2Last Post: 07-26-2006, 06:50 PM -
Dolphin Partmaster help for newbie?
By bdillard in forum CNC (Mill / Lathe) Control Software (NC)Replies: 3Last Post: 01-07-2006, 02:36 PM
Posting Permissions
