586,410 active members*
3,226 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2008
    Posts
    13

    Is the current version of Mach3 viroid....

    Hi,

    Long time licensed user of Mach. Having a problem with my current version, incorrectly scaling certain curve moves, so thought 'will upgrade to the latest'.

    Went to download, and 10% through the download, the incoming virus checker on my companies network, blocked the file as containing a 'banker' trojan.

    Tried the other two releases available, and all behaved the same....
    My older V3 release is fine, except not working right for the current job. :-(

    Have emailed the company about this, so will see if anything is said, but wondered if anyone else had seen this...

    Best Wishes

  2. #2
    Join Date
    Mar 2003
    Posts
    35538
    I use AVG and all 3 versions on the downloads page show up as clean.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  3. #3
    Join Date
    Feb 2008
    Posts
    13
    All versions up to 3.041, test as OK.
    However the ones on the current download page, test 'positive', now with SOHPOS, KasperSky, and SonicWall.....
    While I use AVG myself on my home systems, I have (unfortunately) suffered from it missing some particular threats (I have also suffered similarly with McAfee as well), so have tended to develop a 'never trust only one scanner' approach...
    I have informed the authors.

    Best Wishes

Similar Threads

  1. Newest version of Mach3 Version 1.90.065
    By turmite in forum Mach Mill
    Replies: 3
    Last Post: 01-27-2009, 04:21 AM
  2. What is the limitation of the free version of Mach3
    By Danno in forum Mach Software (ArtSoft software)
    Replies: 4
    Last Post: 01-09-2009, 09:56 PM
  3. What's the latest version of Mach3?
    By squale in forum Mach Mill
    Replies: 7
    Last Post: 11-01-2008, 01:03 AM
  4. Bobcad CAM updates - what version is most current?
    By brooklynmetal in forum BobCad-Cam
    Replies: 9
    Last Post: 05-05-2008, 01:20 PM
  5. Mach3 current command interrupting
    By mikrokontrola in forum Mach Software (ArtSoft software)
    Replies: 0
    Last Post: 04-20-2008, 02:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •