[kesparate]

try chaining the features like the red lines in the pic. you can use 2 contour operations to cut all the features and simply use lead in/out and rough/finish setting to get all the stock. if that makes no sense please let me know.

[stevec]

Hello kesparate,

Thanks for your reply! I have been checking my email hoping for help since I wrote for some.

Do you mean I should overlap the lines for the 2 opposing directions of the pockets in the drawing then chain them a seperates?

Right now when I select for the pocket, I use 3d and set it up to chain face then click on the pocket face.

Thanks
Steve