how do I set x geometry for a fixed drill pass with the fanuc series O-TT control, here is the drill pass.
%
O1002(SUB 1-1/2 CR0SS)
G50S800(MAX SPEED)
T0505(Fixed Drill 1.5625)
G96S400M3
G0G54X0.0M8
Z0.500
G1Z-2.00F0.005
G0Z8.0
X12.0M9
G28 U0 W0
T0500
M01
M99
%
On the Fanuc Series 16 and 18 control The x geometry for tool 5 would be 0 for a fixed drill but thats not the case with the series O. how can i find the x value of the center line on the chuck?? I was thinking to put the fixed drill on the center of workpiece and type in mx0.0? would this work? and how do I know i'm directly in the center of workpiece??? any help would make my life easier!! thanks