[cn00728]

Hello,

What other controllers are out there that output step/direction and also offer spindle control, and I/O's for other control? Note: I am looking for the controllers that have onboard timing, like the DeskCNC controller.

The DeskCNC 2nd gen controller has a lot going for it, but I would like to use other software.

Thank you,
Alex

[BobLWeiss]

Check out PicStep (You need to do some soldering and board making but its WELL WORTH IT!!) LINK

[ger21]

http://www.flashcutcnc.com/html/con_ssg.html

[kfong]

Hello,

What other controllers are out there that output step/direction and also offer spindle control, and I/O's for other control? Note: I am looking for the controllers that have onboard timing, like the DeskCNC controller.

The DeskCNC 2nd gen controller has a lot going for it, but I would like to use other software.

Thank you,
Alex

Here is another design

http://www.embeddedtronics.com/microstep.html
http://www.embeddedtronics.com/
[email protected]