[commodus]

Hi, I'm not certain this is the right place for this post, but I have a question regarding Cimco's Edit V5 program - how do I get it to recognize sub-programs? It doesn't seem to read the M97 command, probably because the 'file types' are limited to ISO milling, turning and heidenhain. I'm just guessing there.

Thanks in advance!

commodus.

[dertsap]

cimco doesnt seem to like m97 , try m98 and give your sub routine an o number and not an n number

[willy8_wu]

Hello Everybody I'm newbie in this CNC forum, please for all your kindness to guide me,
Thanks Before & After


Best Regards

Willy

[willy8_wu]

Hello Guy's, if all of you don't mind would you to help me ?
Where i can download cimco edit v5, or if someone have, please if for all your kindness sent it to me.......


Thank You Very Much for all your kindness,

Best Regard's

Willy

[email protected]
[email protected]

[www.e-denko.com]

Hi,
Please visit our website (DenkoDizayn CAD/CAM/CAE Çözümleri) to download trial software to Cimco Edit 5.
Prices can get detailed information about us

DenkoDesign CAD/CAM/CAE Solution
DenkoDizayn CAD/CAM/CAE Çözümleri
[email protected]

[msiddique]

Hi,
I have one Mori seiki SL-2H with Yasnac LX1 control lathe need help for reseting
342-Servo error (Z)
341-Servo error (X)
310-Servo off
400-Seq error2
I realiy appriciate.Msiddique

[msiddique]

Mazak Quick slant-20N-4axis Cam-4 I can't find where battry is located Ineed to replace it please help me for this thanks.M siddique.

[msiddique]

Hello Everybody I'm new in this CNC forum, please for all your kindness to guide me,
To locate bettry for Mazak Quick slant-20N Mazatrol CAM-4 I really appriciate Thank you very much.


Best Regards

MSiddique

[msiddique]

:wave:

Hello Everybody I'm new in this CNC forum, please for all your kindness to guide me,
To locate bettry for Mazak Quick slant-20N Mazatrol CAM-4 I really appriciate Thank you very much.


Best Regards

MSiddique