Is there a post processor for Featurecam for a Beaver Partsmaster - (it has a TNC155 control and 16 position tool changer) No doubt the generic TNC151/155 pp will work but not know about the tool changer
Is there a post processor for Featurecam for a Beaver Partsmaster - (it has a TNC155 control and 16 position tool changer) No doubt the generic TNC151/155 pp will work but not know about the tool changer
Andrew Mawson
East Sussex, UK
Hi Andrew I have a Beaver partsmaster with Heidenhain 355 and I use Featurecam. Could you possibly email me the post processor you have it would be a big help!
[email protected]
Thanks John.