My offset page wont let me offset past x or z-.050 or +.050. Is there something i can change in settings or parameter page to allow for more work offset???? What iv'e been doing is cheat my x and z geometry offsets which works fine but this can be dangerous since i'm not the only one who sets up the machine. any suggestions????
Results 1 to 2 of 2
-
03-29-2009, 05:18 PM #1
Registered
- Join Date
- Mar 2009
- Posts
- 18
work offset page, puma 250, fanuc 18T
-
03-29-2009, 06:32 PM #2
Gold Member
- Join Date
- Mar 2003
- Posts
- 2932
Well, I found #5013 for limiting the tool wear compensation amount, but I couldn't find anything for the work offset page... sorry.
Reply With QuoteSimilar Threads
-
Work offset page for Mazak VTC-41
By Jcip in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 02-04-2009, 03:24 PM -
Mitsubishi Meldas - Switching Tool Offset Page Type
By avongil in forum Mazak, Mitsubishi, MazatrolReplies: 2Last Post: 09-18-2008, 08:20 PM -
Display Absolute on tool offset page
By billm in forum FanucReplies: 0Last Post: 02-14-2007, 09:12 PM -
work offset in fanuc 6m b- help
By rags in forum FanucReplies: 14Last Post: 08-04-2006, 03:39 AM -
NC reading tool length from offset page, not data page..?
By RMagnusson in forum Mazak, Mitsubishi, MazatrolReplies: 1Last Post: 03-21-2006, 11:07 PM
Tags for this Thread
Posting Permissions
