It is easy to change L and R parameters from Diagnosis ==> PLC IF screen. No need to make any changes in ladder
It is easy to change L and R parameters from Diagnosis ==> PLC IF screen. No need to make any changes in ladder
Oh I know, I don't want to edit the ladder for parameter changing. I want print the ladder so I can study it at home. Please tell me how I load the data in the PLC IF page
Thank you
Carlos Cabrera
In PLC IF page, you find at the bottom side as below
DEVICE DATA MODE
( ) ( ) ( )
In device you need to enter your L or R bit number. Once you enter the details in Device and press input on keyboard, the particular L/R bit details will be displayed on screen.
To force/change the value of L/R bit, you have to enter the value in data and in mode you need to enter 2
For example if I need to change by L007F to 1, then
DEVICE DATA MODE
(L007F) ( 1) ( 2)
In screen, you will observe as below, if successfully changed
76543210
L0078 1xxxxxxxx
That procedure is for Forcing any address. I did that with R1900 data but when I poweron again the cnc, the data changes to the original value.
Carlos Cabrera
Ps: Thanks so much for your help
i have Mitsubishi meldas 64 controll on multispindle drilling machine,
because of dead battery , i lost its parameters which were not saved ,
can you provide me its parameters ,
thanks for your help,
regards,
m.yousaf
i have Mitsubishi meldas 64 controll on multispindle drilling machine,
because of dead battery , i lost its parameters which were not saved ,
can you provide me its parameters ,
thanks for your help,
regards,
m.yousaf
Hello to All Friends
I need your help
I have a hartford machining center, whitch work with meldas magic64.
I need system floppys
Meldas magic64 nc system disk 1 and 2
Meldas magic utility disk 1 and 2
Meldas magic meldasmagic monitor disk 1
Meldas magic custom API library runtime disk 1 and 2
Meldas magic64 NC data 64m disk 1
Please help me
If u have these floppy's please send me a soft copy
My email. [email protected]
Thanks in advance
what does that even mean.............
Mitsubishi Meldas Magic64 PC Based
System SoftWare Disk
AOMEI complete disk image
https://drive.google.com/drive/mobile/folders/1ENcGRNDRlsExITohcSXAEkZUd5pFOblP?usp=sharing
Please, give me the parameter meldas 320M