Hi,
I have a SCM Record 2 with a NUM 750f Controller. I am having trouble drip feeding to my machine. I use EZCam and send files through EZ-DNC Express. My RS232 Settings are as follows:
COM2
Baud Rate:9600
Data Bits:7
Stop Bits:1
Parity:Even
Flow Control: RTS (Have tried XON/XOFF with no luck)
DNC Settings:
Program Start:%
Program End: M02
Block End: <13><10>
Skip Line*
If anyone has any suggestions on what I could be doing wrong I would be very appreciative.
Cheers
Chris.