Plug and Play - 3 options to begin!
If anyone is interested we can send price and spec' on a spread sheet
Regards / Kevin
Plug and Play - 3 options to begin!
If anyone is interested we can send price and spec' on a spread sheet
Regards / Kevin
Hi all I'm from Denmark, actually surprised to find so few from Denmark. I'm working as a service technician, for CNC controlled drilling and routing macines, for the pcb buisseness. But now I want to build my own CNC router for hobby use.
Hi All
I am in North Wales. A newcommer to CNC , looking for the best options for building a 3 axis plasma/router table
hi i`m from Serbia,
tryin to start building my first CNC.
Bill S Knottingley West Yorkshire.UK
Just seen the post from "apply", I'm in Portugal...Algarve...Rod
Hi im from Selby uk
Hi all
Just thought i would put a post and let see if there was any one down in the Kent
area sunny Romney Marsh Kent,Building a routing machine at the moment and a foam
cutter after that converting the X3 mill.
Bill
To Grandad...
I live in Loulé and you?
I'm in Moncarapacho but I work in Quinta do Lago during the week..Regards Rod
Hi, I am about to buy a 50hz wire EDM and need to operate it on 60hz in the US, will it work without problems?
THANK YOU FOR ANY HELP
Hello all,
I'm from the UK. About 4 miles from Oswestry, Shropshire although the Welsh border is about 5 mins walk from where I live. Local pub is "The last pub in England" according to the sign anyway.
About to start building what will eventually be a 6 axis machine.. cut area 1.7 x 1.5 metres...but will have enough to keep me busy getting the first 4 going. Build starting with controller as soon as the BOB and other bits arrive..
anyone in my area or close.. give me a shout..
Greetings Apply, Grandad and GHSoares
I´m from Santa Maria da Feira, Portugal.What kind of machines and software do you work?
Using Mach 3 with a home built router
Hello,
I'm from Groningen, The Netherlands. I'm trying to develop a multipurpose CNC machine...
Developments could be followed here: www.khwelling.nl/cnc/index.html
Suggestions & idea's are always welcome!
Cheers from Portugal, Almada city !!!
Hi all , just starting my home made CNC machine .
Olá a todos os restantes membros portugueses, um abraço e venha a França.
Hello Azores , miss you guys.Beautifull islands with great people.
Hi all,Originally Posted by Puc
Im in Meath, Ireland. Am I the only Irish on the zone?!
I want to do the opposite to above. Buy US 60Hz tools and run them on 50Hz. Has anyone done this before?
Hi! I'm from Fredrikstad, Norway - Thanks for the european welcome... ;-)
From Turkey. (well, actually... I am a Turkish Man in USA... )
Hi! I'm from Stockholmm, Sweden! This is my first post!
Building my first CNC portal router out of aluminum and some SHS20 rails. Quite sturdy I Hope. I'll create my own thread when time is right!
cya!
Building machines since 2005