hello everyone,
I need help to download the nc partprogram,nc data from pc to cnc in Fanuc 0MC/0MD system while cnc to pc downloading is possible.Checked cable connection and found ok.
[email protected]
[email protected]
Results 1 to 2 of 2
-
04-07-2009, 11:27 AM #1
Registered
- Join Date
- Dec 2007
- Posts
- 12
data downloading pc to cnc problem in 0MC/0MD fanuc system
-
04-07-2009, 12:40 PM #2
Gold Member
- Join Date
- Jun 2008
- Posts
- 1511
Attached is the settings an pinout for the O-series. We can help if you explain what is happening. Is there alarms at the PC or CNC when trying to communicate? Does it even attempt to send or receive data? The more detailed you are the easier it is to trouble shoot.
Stevo
Reply With QuoteSimilar Threads
-
FANUC O-TD data transfer problem
By flyfishing89 in forum FanucReplies: 6Last Post: 06-04-2009, 10:44 PM -
Problem with Data flow between Fanuc 6M and DNC software
By Saluce in forum FanucReplies: 1Last Post: 08-28-2008, 01:20 AM -
Problem in trasmission of data to Fanuc 6m-b
By giorgis in forum FanucReplies: 7Last Post: 12-21-2007, 01:16 AM -
Fanuc OM-A or OM-B system PMC problem.
By rai in forum FanucReplies: 1Last Post: 11-22-2007, 02:55 PM -
Fanuc 9M data transfer problem
By YOO in forum FanucReplies: 1Last Post: 01-18-2007, 03:26 PM
Posting Permissions
