586,913 active members*
2,874 visitors online*
Register for free
Login

Thread: 1982 Mazak quickturn

Results 1 to 3 of 3
  1. 04-08-2009, 08:16 PM #1
    fer_mayrl
    fer_mayrl is offline Registered
    Join Date
    Jun 2003
    Posts
    91

    1982 Mazak quickturn

    Hello Guys,

    Well i stumbled upon a 1982 Mazak quickturn with a busted T1.

    I was wondering if it would be a good buy to retrofit it with PC based system.

    Does anyone know what the rated parameters on its servo motors (mitsubshi HD80 dc servos) are? (voltage, current)

    It looks like the machine is a good candidate for a retrofit but i would like to know if I can use the motors and drivers that come with the machine.
    Im attaching a couple of pictures of the machine and of a servo.
    Thanks!!
    Fernando
    Attached Thumbnails Attached Thumbnails Mazak1.jpg   mazak3.jpg   mazak5.jpg  
    Reply With Quote Reply With Quote
  2. 04-08-2009, 10:15 PM #2
    championfine
    championfine is offline Registered
    Join Date
    Feb 2009
    Posts
    4
    hi,

    If you are going to retrofit the mazak machine, I would be interested in buying the control boards for the mazak machine. I have a similar machine Mazak T1 control that needs boards. My email is [email protected]
    Reply With Quote Reply With Quote
  3. 01-26-2011, 04:52 PM #3
    vrasak
    vrasak is offline Registered
    Join Date
    Nov 2006
    Posts
    61
    Hi Fernando,

    You could try with 96 Vdc and it should run approximately 2000 rpm, then measure the current, should be around 10 Amp.

    Weerasak
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Is this Mazak QuickTurn 10 worth buying?
    By barchdesigns in forum Uncategorised MetalWorking Machines
    Replies: 17
    Last Post: 07-14-2009, 09:44 PM
  2. Problem with toolchange in Mazak Quickturn nexus II
    By Legenden in forum Mazak, Mitsubishi, Mazatrol
    Replies: 2
    Last Post: 03-31-2009, 08:36 PM
  3. 1982 fanuc CNC CK2
    By mark oz in forum DNC Problems and Solutions
    Replies: 2
    Last Post: 01-30-2009, 12:09 PM
  4. Problem programming my Mazak QuickTurn 15
    By revlimit in forum Mazak, Mitsubishi, Mazatrol
    Replies: 3
    Last Post: 10-24-2008, 02:28 AM
  5. mazak t32-2, quickturn 8n
    By Enda in forum Mazak, Mitsubishi, Mazatrol
    Replies: 3
    Last Post: 02-09-2006, 11:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules