[edbanks]

I just picked up this mill, a Supermax YCM-30 with Anilam 1100M controls, and was wondering if anyone might have manuals for either the mill or controls. Thanks!

[CNC-Joe]

Hi Ed,

I have a SuperMax YCM-30 and an Anilam Crusader controller
Don't know if it helps you or not.

I plan on upgrading my controller to Gecko-320 based controller

Let me know if I can help.

I'm from Romeo Michigan.

Joe

[edbanks]

I have a SuperMax YCM-30 and an Anilam Crusader controller
Don't know if it helps you or not.

I plan on upgrading my controller to Gecko-320 based controller

Let me know if I can help.

You wouldn't happen to have copies of the manuals would you, specifically prints/manuals for the controls? I picked up this machine the other day with the controls inoperable and would like to see if i can trace down the issue. Thanks!

[radioactive]

I have the original manuals for my SuperMax-40 w/ Anilam Crusader M controls, probably not the same? I don't know...

If you want factory manuals you can call YCI (the importer for Supermax). They will need the model number and the build number (serial number) of your mill. The phone number is 562-906-6118. I think it was about $75.