[libory]

Hi all,

Could anybody tell me how can I setup my limits in my DIY CNC?. I don't have hardware limits at the moment as I'm testing it. Can I setup "software limits" instead of hardware limits? and how?

Another thing.... because the manual is not really clear... how can I setup the home positions? Lets say... I put all my axis in the position where I want to be home and what I have to do next? How can I reset ALL coordinates in the program to be that point 0,0,0? Because if I click on "machine coordinates" it is nothing to do with the normal coordinates.... I'm very confused as you can see. How can I setup "machine coordinates" or at least reset them because if I click "reset X or Y or Z" it just ignore it.

Please a bit of help on this... thanks guys..

[Crevice Reamer]

Hi libory!

Here you go:

http://syilamerica.com/docs/Homing_V...%20Limits.html

CR.

[CurtisBarclay]

Hi libory!

Here you go:

http://syilamerica.com/docs/Homing_V...%20Limits.html

CR.

That's sad, the video cuts off after 1 minute of running. I loaded it from their website and the same thing...Bummer!

C

[Crevice Reamer]

I just tried it twice and it works fine. Try it again. If your computer is updating or something it may pause. Wait for it to resume.

CR.

[agguilar]

thanks you for the info