I purchased a 1995 1720. It came with a few tooling bits and a drawer of gears. The trouble is I have no idea what the gear idler arrangement is. I have the manual but it does not really have a good picture. Does anyone have a picture of the gearset head on so I can review it.
And also any info on how many gears I SHOULD have gotten would be a plus!
Thread: New owner, have a few ???"s
Results 1 to 2 of 2
-
01-15-2005, 05:08 AM #1
Registered
- Join Date
- Oct 2004
- Posts
- 6
New owner, have a few ???"s
-
02-26-2009, 08:00 PM #2
Registered
- Join Date
- Jan 2008
- Posts
- 458
As far as the fine tooth change gears with the 4 spline inner hub, there should be 17 in all. Usually 4 will be mounted on the machine and the rest in your box of parts. I think this set of gears has remained unchanged since the 80's. Following are your numbers;
27,30,32,33,36,39,40,42,48,49,50,51,52,54,56,57,60 ,63
Over the years I've broken a couple and shoptask always has a good supply on hand.
Reply With Quote
Posting Permissions
