I got a free epson lq-510 printer and I found two servos inside of it.
One says
EM-91
EPM-4243
0511
The other says
EM-90
EPM-4244
0317
Does anyone know how to look up the specs on these? I would like to use them for my pcb etcher/router.
Nick
I got a free epson lq-510 printer and I found two servos inside of it.
One says
EM-91
EPM-4243
0511
The other says
EM-90
EPM-4244
0317
Does anyone know how to look up the specs on these? I would like to use them for my pcb etcher/router.
Nick
HELLO MY NEW FRINDS
GAMAL YONES
[QUOTE=NickLatech;61076]I got a free epson lq-550 printer and I found two servos inside of it.
One says
EM-91
EPM-4243
9703
The other says
EM-90
EPM-4244
9617
Does anyone know how to look up the specs on these? I would like to use them for my pcb etcher/router.
GAMAL YONES
I've got the same two motors. From my multimeter looking left to right across the leads, 1,3,and 5 are connected with 3 being a center tap at 1/2 the resistance. 2, 4, and 6 are also connected, with 4 being a center tap at 1/2 the resistance. With a controller that expects 4 wires, use 1,5 as one pair and 2,6 as the other pair. Ignore 3 and 4.