[dertsap]

http://shopcam.com/

I want to introduce Shopcam to the forums and make more people aware of a quality alternative to the very few affordable and functional softwares that are available .
Shopcam has been around for over 20 years and is a proven quality program .Dan Broderick is a software engineer from Michigan , he is a great gentleman who has taken extreme care and pride in creating this program . This software has always been dedicated to the professional and it's price had always reflected that but with recent price changes it has been opened up to a wider range of customers . CNC enthusiasts can now take advantage of a high quality program that is now within the budget of the hobbyist and it's a low cost but valuable tool for the professional .

the CNC Toybox http://cnctoybox.com/ will soon be offering this program as well as offering support to our customers through email and hopefully within the forums so that others will have information at their finger tips . To assist our customers we will begin creating video tutorials and they will be offered on our site , we are confident that once people see the ease of use with this program they will be up and cutting in no time rather than sitting in the confusion that some budget softwares will cause

There is now a 30 day fully working demo available on the shopcam site so that customers can test the software as well as post code , this way a customer can be 100% confident that they are purchasing a product that will suite their needs.
Customers can also be confident in the integrity of Shopcam because every customer is treated equally , there are no pushy salesmen , no unfair price fluctuations and most of all it has a track record that reaches over 20 years as a quality product

A demo can be downloaded here http://shopcam.com/ , the bottom line is the software speaks for itself , to download a demo just enter your email address on the demo page and you will be sent a download link and a 30 day activation code

[dertsap]

So we are happy to say that we are now offering Shopcam on our site . Shopcam is designed to be efficient and effective , it's designed to be a shop floor tool allowing design to be done on the fly allowing the operator to to focus his time where it is best spent "machining" . Shopcam is available for mill ,lathe , wire , plasma or punch press

I'm quite aware of the flogware and nightmareware that is available out there within the same price range so if your tired of endless phone calls from salesmen or are tired of waiting revision after revision for a stable software release then try the demo of shopcam http://shopcam.com/ , it posts code and is fully functional for 30 days , it's all there with nothing to hide , You'll know within a month whether it's best suited to your needs or not