[bobrob]

For haas lathe ,, ?? say hole size starting at .500 and finishing at , 1.5 using a borring bar.. going 2.0 inches deep ..

Thanks in adavance

[JDenyer232]

For haas lathe ,, ?? say hole size starting at .500 and finishing at , 1.5 using a borring bar.. going 2.0 inches deep ..

Thanks in adavance

Look in your Haas work book and owners manual, it will have the info you are looking for. If you don't have these manuals then post back and we will see if we can help.

[ggilbert76]

G0 X.5 Z.1 M08;
G71 P5 Q6 D.05 F.01;
N5 X1.63;
Z.05 G41;
G1 X1.5 Z-.015;
Z-2.0;
X.5;
N6 X.45 G40;