[millmaster23]

hey burgerboy please update your link for all of us to enjoy

[hdsporty75]

do you have a post for a cinncinati milacron that has a fanuc om-c control

[lsa1541]

Certainly you can use post that can be found at internet sites. The problem is, can those post satisfy your needs. Let me tell of my experience of Gibbs post. My company got a new CNC mill. From GibbsCAM reseller we got a post. It worked but not the way we wonted. So we asked the reseller to modify post. They did it twice. And we weren’t still happy. They gave up and sent us Compost so that we could do all the modifications. I did. Now we have version 10-th of post that fits exactly to our needs.

Any chance u can forward me a copy of the Compost? I am having trouble with my post processor for my HAAS


thx
Steve

[toddman2010]

I'm looking for a good .pst template editor for Gibbs Cad so I dont have spend so much time editing programs fresh from the post. Is there user friendly software (unlike compost 2)that you can use to customize your template? Just got the latest version of Gibbs and rep support is nill these days. Thanx in advance for any help.

[timoty]

I do not know that there is more than ComPost.

[Scifimetropolis]

Does anyone know if there is a 4 or 5 axis post for WinCNC controller on a Shop Sabre 4896 machine? I use inch measurements and I have 4th axis ability now. I'm looking at possibly adding a 5th axis setup on my z axis. It's a Doughty Drive.

Thanks