I was looking for a bsf tap and the only one I could find is a ns tap. The size I am looking for is a 3/8 20 bsf but on msc web page the only thing list is a 3/8 20 ns tap. Is this the same thread?
Thread: bsf taps
Results 1 to 3 of 3
-
05-10-2009, 08:34 PM #1
Registered
- Join Date
- Jul 2005
- Posts
- 236
bsf taps
-
05-10-2009, 10:14 PM #2
Registered
- Join Date
- Nov 2007
- Posts
- 479
call msc, they will have an answer...Ive looked on the internet and its kinda hard to interpret the info since there are some minor interchangeability issues, it might work but not 100% sure. http://www.ring-plug-thread-gages.com/ti-N-vs-UN.htm read this and look in this site. Maybe a tap or threading expert here can give a clearer explanation.
-
05-11-2009, 12:11 AM #3
Registered
- Join Date
- Oct 2003
- Posts
- 263
BSF is a fine-pitch Whitworth thread.
Software For Metalworking
http://closetolerancesoftware.com
Reply With QuoteSimilar Threads
-
HeliCoil Taps
By ranchak in forum MetalWork DiscussionReplies: 7Last Post: 07-04-2009, 01:52 PM -
Breaking Taps?
By tricmachine in forum MetalWork DiscussionReplies: 2Last Post: 01-13-2009, 08:22 PM -
Breaking 6-32 taps
By CNCMike in forum MetalWork DiscussionReplies: 9Last Post: 12-05-2008, 10:27 PM -
TAPS BREAKING !!
By weaston in forum MetalWork DiscussionReplies: 15Last Post: 07-07-2008, 08:08 PM -
lots of taps
By jacek in forum MetalWork DiscussionReplies: 11Last Post: 04-02-2008, 12:07 AM
Posting Permissions
