[mopar499]

I have been tring to figure out how to hide the toolpath after they have been computed. They cover the part so you can not see some of the features that I still need to deal with.

[Kipper]

I have been tring to figure out how to hide the toolpath after they have been computed. They cover the part so you can not see some of the features that I still need to deal with.

I select them...place them on their own layer and then hide them...hth

[mopar499]

sorry I have v23

[PinMan]

There should be a blank feature after generating to toolpath

[mopar499]

I have tried using the one on the tool bar is there another one somewhere else?

[PinMan]

feature submenu>(name of feature) submenu> Rough/Finish> Right Click> Blank

[SBC Cycle]

Under each profile should be Rough and Finish. Click on the toolpath you want to blank (it should highlight on the screen), right click then hit blank.

[mopar499]

That is what I thought for some reason I cant get the toolpath to highlight and never could. When I right click on Z level rough it shows a blank surface but I cant select it.

[Allen123]

You can blank you tool path very easy in the V23

[mopar499]

Thanks Allen123

That makes it crystal clear! LOL

[Allen123]

Thanks Allen123

That makes it crystal clear! LOL

Just right click on the rough or finish icon below the feature and choose the color you want to change or blank to blank the tool path.

You have to do them one at a time, and un blank one at a time. But this is what you wanted right?

[mopar499]

Thanks Allen123

Your right that was easy, big learning curve, but mostly easy.

[BurrMan]

You'll also notice from there you can change the individual "Colors" of the "Rough" Finish" and different "feature" toolpaths.

For instance, Toby may choose "Pink" for his Rough pass! :O

[Allen123]

LOL LOL LOL oh man, that was funny!

[tobyaxis]

You'll also notice from there you can change the individual "Colors" of the "Rough" Finish" and different "feature" toolpaths.

For instance, Toby may choose "Pink" for his Rough pass! :O

Lets try to keep your comments on topic and the toilet hummer to yourself

[lynn mynatt]

sorry...already answered