I will be at the EMC Fest in Wichita at Stuart Stevenson's plant, MPM, from May 21-27. I probably will be getting there on the afternoon of the 21st, I'm guessing we will break up and head out on the afternoon of the 27th. I will have my minimill with rigid tapping there as usual, and some brushless motors that I have been developing signal converters for. I now have converters for Panasonic Minas-series and Fanuc "red cap" motors working. These two motor styles have non-standard commutation signals, so you need a converter to use them with my brushless drives, or other drive makes that expect the industry-standard "Hall" signals.