On my readout it says 11,520 is my max rpm when it is running at 400hz. I must have something set wrong on my 2.2kv spindle.
Thanks
On my readout it says 11,520 is my max rpm when it is running at 400hz. I must have something set wrong on my 2.2kv spindle.
Thanks
Do you have it set as 2 poles ?
No I have it set for 4 poles.
Then setting it as 2 poles should fix it. It looks like it would only read up to 23,040RPM though so I don't know where the other 1,000RPM has gone.
What is pd144 suppose to be set at.
Thanks
I'd think it's 3,000 as it's the speed at 50Hz.
(As 400Hz is 24,000RPM.)
That was it.
Thanks Alot