Hello everyone,
I have a SGM08A2FJ25 servo motor for DR2 servopack. Its work fine.
I also have 2 pieces of 08AAFJ11 servo motor and they not work with the same settings. I think the pulse number of the encoders are different.
Please help me if you can.
Thanks
Thread: Yaskawa ac servo encoder problem
Results 1 to 3 of 3
-
05-22-2009, 06:27 PM #1
Junior Member
- Join Date
- Oct 2008
- Posts
- 10
Yaskawa ac servo encoder problem
-
08-16-2009, 05:22 AM #2
Registered
- Join Date
- Aug 2009
- Posts
- 5
Two things:
1st: The back of the motor where the encoder is housed usuall has a Sticker on it that will give you a hint as to what kind of encoder that motor uses. a common one is UTOPH - 81 AWF.
2nd: What kind of drive Do you have? an SGDA or SGDB, etc. ?
-
08-16-2009, 06:24 AM #3
Junior Member
- Join Date
- Oct 2008
- Posts
- 10
To tell you the trough I mixed up the type numbers. 08AAFJ11 works fine. SGM08A2FJ25 and SGM08A2FJ24 doesn't work. I have Yaskawa DR2 servopacks to try them and used to these motors were wired to DR2 OEM type servopacks. There isn't sticker at all.
Thanks
Reply With QuoteSimilar Threads
-
Yaskawa servo
By rai in forum Servo Motors / DrivesReplies: 13Last Post: 04-28-2009, 04:32 AM -
Yaskawa USASEM-08TF22-A encoder schematic diagram
By tayfunk in forum Servo Motors / DrivesReplies: 0Last Post: 03-03-2009, 02:37 PM -
Yaskawa Encoder-DC Servo Motor trouble
By nlh in forum Servo Motors / DrivesReplies: 2Last Post: 11-28-2006, 03:58 PM -
Fanuc servo / encoder problem
By Andy Fritz in forum Servo Motors / DrivesReplies: 11Last Post: 10-15-2006, 06:44 AM -
Yaskawa AC Servo
By HillBilly in forum Servo Motors / DrivesReplies: 3Last Post: 10-14-2005, 02:21 AM
Posting Permissions
