Well I have ordered a Sieg X3 Mill today, to replace my HF mill. The mini mill works good, but I need something bigger for the stuff I have planed for it. So the servo converted mill will be up on ebay next week. I have fixed the accuracy problem, I was having and will post pic in the other section.
This machine I plan on going stepper and plan on getting a conversion kit from Industrial Hobby , and gecko drives. So the HF mill will be sold with the servos. So I will have pics up as soon as I start this new project, by the end of this month.
If you have done a conversion please post some pics and your thoughts on the machine...