Hello,
I Want to purchase the G540 Drive, but i have some questions:
1) Can i use this motor with the G540?
Stepp ang. - 1,8º
Tensão 5.88V / phase
Nº Phase - 2
Resistência - 1.68 OHMS / phase
Corrente - 3.5 A / phase (the vendor tell me to use 2.5A in Bipolar mode)
Inductance - 5.24 mH/phase <<<<<<<<<<<
Isolation Class - B
Holding Torque MÁX (bipolar) - 32 Kfg.cm
Inércia do Rotor - 1.05 KG.cm²
Temperatura - 80ºC
Wires - 6
2) I have a 48 VDC - 7.3 A Power Supply - Is It enough to this motor? I will use 4 motors.
Data Sheet Motor http://www.motores.akiyama.com.br/pd...HY5.88-1.8.pdf