Hi,
i am a from australia and i have scratch built a cnc machine come router and i am looking for a spindle motor with the ability of a Auto tool changer.
the reason i want them combined in one unit is the size, i have looked at belt drive spindles and the head stock size of the machine really does not allow for both motor and spindle unit.
the spindle motor required specs are:-
1.5 - 2.0 Kw
4.75" or 120mm in Diameter
12" - 18" or 300 - 450mm Long ( But can be a little longer )
ISO or HSK (Not sure which one need help on best choice)
220 Volt Single phase
Low Rev's say 500 RPM
High Rev's say 30,000 RPM
Self Cooled
ATC Mechanism is air but is there an electronic one
Spindle to be mouted Vertically
so now the seach begins there is really no supplier of these types
Spindle motors in australia if there is they are not well advertised and i have been looking for 5 weeks.
Your help will be greatly appreciated in finding a supplier or some one who has gone down this path that could offer some of there wisdom.
Kind Regards
Askalot