586,068 active members*
3,706 visitors online*
Register for free
Login

Thread: Floating head switch

Results 1 to 2 of 2
  1. 06-15-2009, 12:37 AM #1
    millman52
    millman52 is offline Member
    Join Date
    Feb 2006
    Posts
    1260

    Floating head switch

    Building a floating head Z axis for mounting Plasma.

    When wiring the micro switch. Do I use the NO or NC contacts for signal when torch touches off on the surface of the sheet being cut.



    Edit Note: Tom answered my question on the CandCNC help board......

    NO or the same as all other home switches.
    If it works.....Don't fix it!
    Reply With Quote Reply With Quote
  2. 06-15-2009, 02:17 AM #2
    plain ol Bill
    plain ol Bill is offline Registered
    Join Date
    Nov 2007
    Posts
    343
    Tom beat me to it then! Yes, normally open .
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. THC Floating head needs to be spring loaded?
    By Normsthename in forum Waterjet General Topics
    Replies: 3
    Last Post: 12-12-2007, 02:44 PM
  2. Floating Tap Head - Advice Please
    By UKRobotics in forum Uncategorised MetalWorking Machines
    Replies: 3
    Last Post: 10-24-2007, 02:03 AM
  3. Floating head on Kress router
    By zoltan in forum Mechanical Calculations/Engineering Design
    Replies: 3
    Last Post: 03-02-2007, 02:52 PM
  4. Floating head / switch pics?
    By KKamel in forum Waterjet General Topics
    Replies: 1
    Last Post: 02-01-2007, 06:07 AM
  5. Floating Head Switch?
    By Redline in forum Waterjet General Topics
    Replies: 9
    Last Post: 09-18-2006, 02:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules