SRIENDS,
RECENTLY I HAVE RECD A TECH HELP FROM DENFORD
Setting the 0MC diagnostics when restarting from a RAM clear out...
- Reload your parameters first
- Re-enter diagnostics from 450 to 470 only
- set diagnostic 453 bit 0 to 1
- Turn the control off then back on
Setting 453.0 to a 1 will reset all the other diagnostics such as counters, timers etc. to factory defaults - save a lot of typing
Turning off and on will reset D453.0 back to 0
WILL IT WORK ON OTHER MACHINES ALSO.
THANKS
CHANDRU