Hey, im new here, my name is Luka, im an architecture student, living in Novi Sad, Serbia, i attended a "Computer electronics and programing" high school, but even though i ended up here i still try to keep this a active hoby...
Last summer i started building a CNC machine, pretty much from scrap i could find, bits and pieces of hardware, but after the finals this year i've decided to try and finish the job. Anyhow, im not at my workshop now, thats about 50km away, but i'll upload a few pics these days, just got the Z axis complete, its got a 30 000rpm Milling Head, for wood mainly. I whould very much appreciate some general advice, in terms of the general project, if there are some basic rules about the work size, the machine components, where i could order a good electronic kit, etc.
I'm a bit confused about this item i found on e bay, can anyone explain to me, how do i mount limit switches on this kit, if there are imputs at all...
http://cgi.ebay.com/Cnc-Mill-3-axis-...emQQptZLH_Defa ultDomain_0?hash=item4a9831a8a9&_trksid=p3286.c0.m 14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1205|240% 3 A1318|301%3A1|293%3A1|294%3A50
Sry again about the lack of pic's and plans, will get to work on that asap.
Thanx in advance!