[cut more]

I had the crt monitor on one of my Leadwells die this weekend. It has the MO control. The CRT is an MDT-925 PS.

Has anyone replaced one of these with an LCD?

The monitor was acting funny for a couple days before it died but is there anything else I should test before putting a new monitor in and barbecueing it?

Thanks for any help,
Cutmore

[nastek]

I had the crt monitor on one of my Leadwells die this weekend. It has the MO control. The CRT is an MDT-925 PS.

Has anyone replaced one of these with an LCD?

The monitor was acting funny for a couple days before it died but is there anything else I should test before putting a new monitor in and barbecueing it?

Thanks for any help,
Cutmore

Try to repair first, it's easy, just check the capacitors and replace new part. or take to TV serviceman.
LCD is expensive.

[A1CNC]

Hi, I have one of these where the flyback transformer smokes. How would I test to see if there is anything else that has gone bad? Is it possible to replace just the flyback?

Thanks for any replies,
Eric

[nastek]

Hi, I have one of these where the flyback transformer smokes. How would I test to see if there is anything else that has gone bad? Is it possible to replace just the flyback?

Thanks for any replies,
Eric

i ussualy use additional SCREEN+FOCUS set from old TV/Monitor.
just connect it to the HV cable and Ground, cut off screen+focus cable from original flyback and replace the cables from additional Screen+focus set.
no need flyback replacement, because it's hard to find the substitution.