Hey all,
I am putting together a rotary phase converter and need some guidance.
I have a 7hp 3 phase motor that works.
I have the boxes for the capacitors and relay.

I'm using this as a guide: http://home.att.net/~waterfront-wood...econverter.htm

My relay is 3AAR3 J4A4 : http://www.geindustrial.com/publibra...|3ARR3|generic

Can someone help me put it altogether? I would like to know how to wire up the relay.

The only terminals on the relay that I can physically hook wires to are 1, 2, and 5

Note: I posted this to the electronics section before I found this section. If someone could delete the original thread I would appreciate it.