Almost finished my flatbed router, I use Acad and Mach3. Can anyone suggest an uncrippled version of DXF to Gcode conversion programme ?
I'd rather have a time expired demo prog rather than one that chops half the code out.
Many thanks
George
Almost finished my flatbed router, I use Acad and Mach3. Can anyone suggest an uncrippled version of DXF to Gcode conversion programme ?
I'd rather have a time expired demo prog rather than one that chops half the code out.
Many thanks
George
Free macro that converts circles and polylines into g-code. Works in 2002 and newer.
http://home.comcast.net/~cncwoodwork.../ac2gcv043.zip
More info here.
http://www.cnczone.com/forums/showthread.php?t=8226
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
If you want a commercial package, look at Vectric's Cut2D or SheetCAM.
CamBam has a free version.
http://www.cambam.co.uk/
G Simple is free,
http://www.gsimple.eu/
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Hi Gery,
Thanks,
Loaded your routine into ACAD2008. Worked first time, exported a small cnc file some lines and circles but my arcs were missing ?
I'll have another try.
George
Polylines and Circles only. If you have arcs, join them into a polyline, or convert them with the PEDIT command.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks gerry,
If I'd read the first paragraph of your instruction I'd have known this :-)
Your routine woks just fine,
Thanks you,
I will investigate others but yours will get me going.
George