Is there a way for camworks to program multiple work offsets eg. g54,g55,g56, and so on? What I want it to do is send tool 1 to all offsets before switching to tool 2 and then send tool 2 to all and so on. Right now I just copy and paste the code over and over. Is there an easier way to do this? I am using a Haas VMC
Thread: programming multiple offsets
Results 1 to 2 of 2
-
07-30-2009, 02:17 AM #1
Registered
- Join Date
- Nov 2008
- Posts
- 47
programming multiple offsets
-
07-30-2009, 04:59 PM #2
Registered
- Join Date
- Mar 2008
- Posts
- 638
Without using Assembly Mode, you can right click on "NC Manager", "Sort Operations..." and then click "Across Setups" or "By and Across Setups".
I say, without using Assembly mode simply because I don't use it and don't know if that option is there. I believe it is but don't know for sure.
Tell us what you find.
Reply With QuoteSimilar Threads
-
Multiple C-axis offsets?
By bman356 in forum G-Code ProgramingReplies: 4Last Post: 04-03-2009, 10:17 PM -
Multiple offsets
By Tinker Simpleto in forum Haas MillsReplies: 17Last Post: 12-05-2008, 02:01 AM -
multiple work offsets in MCX
By bob1112 in forum MastercamReplies: 18Last Post: 10-01-2008, 02:17 PM -
Tl-25 multiple offsets for same tool Help
By mkmk123 in forum Haas LathesReplies: 1Last Post: 11-24-2007, 01:22 AM -
Multiple Fixture Offsets
By Benji in forum EdgeCamReplies: 5Last Post: 05-02-2007, 10:28 PM
Posting Permissions
