[ynnek]

I need to locat a 15 pin femal to 25 pin male adapter to connect a Mitutoyo AT715-750 scale to a Sargon Prospector DRO. The original glass scale crapped out & I got this magnetic Mitutoyo to replace it with. Also if someone could help with a pinout I could possibly make my own adapter.

[LMSC]

I need to locat a 15 pin femal to 25 pin male adapter to connect a Mitutoyo AT715-750 scale to a Sargon Prospector DRO. The original glass scale crapped out & I got this magnetic Mitutoyo to replace it with. Also if someone could help with a pinout I could possibly make my own adapter.

Hello,

Sorry but the scale you have is not compatible with the display you have.

The Sargon display needs a +5 volt TTL square wave (single track) input from the scale.

The Mitutoyo scale you have has a output of 2Vpp sine wave - Electromagnetic induction system (3 tracks, absolute AOS).

Regards,
Tim Barnard
LMSC
877-376-4373
www.sargon-dro.com

[ynnek]

Hello,

Sorry but the scale you have is not compatible with the display you have.

The Sargon display needs a +5 volt TTL square wave (single track) input from the scale.

The Mitutoyo scale you have has a output of 2Vpp sine wave - Electromagnetic induction system (3 tracks, absolute AOS).

Regards,
Tim Barnard
LMSC
877-376-4373
www.sargon-dro.com

do you carry the scale I need, or would it be better to by a new system? The date on the read out is 11/98. Seems to be a bit old.

[LMSC]

do you carry the scale I need, or would it be better to by a new system? The date on the read out is 11/98. Seems to be a bit old.

Yes we carry replacement scales. I don't see a reason to replace everything unless your not happy with the rest of the system.

Regards,
Tim Barnard
LMSC
877-376-4373
www.sargon-dro.net