Hi, is there anyone who can give me directions on how to do the limit switches and e-stop?
At least the wireing .I'm stock on that, Plus I don't have any experience on cnc. I have the ROCKCLIFF 4 axis stepper motor controller board.I already have the switches. But I don't have any idea how to install them.
Can anyone help me please.
Thank you.
Thread: Limits and E-Stop
Results 1 to 4 of 4
-
08-04-2009, 01:01 PM #1
Registered
- Join Date
- Jul 2009
- Posts
- 3
Limits and E-Stop
-
08-05-2009, 04:26 PM #2
Registered
- Join Date
- May 2006
- Posts
- 26
Originally Posted by rockcliffcnc
Hi
I wired my limits according to the rockcliff driver manual, you can download a copy from their website, www.rockcliffmachine.com
http://www.rockcliffmachine.com/Rock...DriverV108.pdf
follow the limit switch wiring diagram, on page 11, it worked for me
-
08-06-2009, 03:15 AM #3
Registered
- Join Date
- Jul 2009
- Posts
- 3
Thank you so much . I'll try it.
-
08-06-2009, 03:18 AM #4
Registered
- Join Date
- Jul 2009
- Posts
- 3
Sorry Mcgemby. Is me again.
Wondering what software are you using?
Reply With QuoteSimilar Threads
-
EMC2 E-stop parallel port pinout and E-stop loop
By GreenLead in forum LinuxCNC (formerly EMC2)Replies: 12Last Post: 08-03-2010, 06:05 PM -
G540 Low voltage for E-stop and limits?
By MrWild in forum Gecko DrivesReplies: 4Last Post: 10-14-2008, 10:28 AM -
anyone help e-stop and limits
By krymis in forum Benchtop MachinesReplies: 3Last Post: 02-19-2008, 03:45 PM
Posting Permissions
