Guys,
I will again warn you about buying from Bill, He has no sense in honoring the customer! He will take your money and run, and that is the last you will hear from him. Best you go to a reputable dealer or build your own, Bill is a pretty good con man! I had to contact Vectic to get my software because Bill never got it for me, Tony of Vectic honored my request and gave me my license, Bill now owes Vectic $299.00 instead of me! And he still did not pay Vectic, Can you image that?
I have been struggling with my PCnC machine, I get poor carves off of it, Yes I am a rookie but I have no problem understanding the software (Mach3, Vcarve Pro and Cut3D) It is the machine I seem to have problems with, It carves well on thin stock but not on anything over 0.5 of an inch. It cuts letters good but not figures? Cuts are jerky and not smooth. I paid top price for cutters and mills thinking I had poor quality cutters but there seems to be no difference between them. I have played around with the spindle speed and feed rates but still get poor cuts. I still do not know if it is me or the machine and Bill never answers my email for help nor does he answer my phone calls so, I am alone trying to figure things out. It is fun yes, but fusturating too. I am not giving up, but I have given up on Bill Johnson and his hillbilly barn operation. I wish you guys could see what I saw down in Vevay, In. Beaware and buy at your own risk!:tired::tired: