[k-linkz]

Hi all,
I new to this forum. First i have dl the live version of bdi and the bdi file.
i don't have any idea at all of everything. I'm starting at ground zero here. . i got a PC with 256 mb DDR with a cpu 1.47 Ghz. i would like to controle 3 axes. i have 3 step motor 1.67 volt DC with 7 A (each). i have also a transformator, a bridge, 3 capacitor of 5 ohms. and 200$ budget.

is there anything like a tutorial or links or any help here my email : [email protected]

can anyone here me. i would like to start this project.

thanx in advance u guys are great.

[solarchimesam]

Linux EMC
I have been using lnx for 13 years and have EMC running next to
my M$ windows cnc. Email me if you have a question.
I am no expert but I have been through the frustrations that new users
might run in to.

EMC is not perfect yet I wiil jump back and forth from EMC to
windows and swap the gcode files.
I like to create gcode in M$ windows then use it in EMC.

Good luck