If anyone here has a MM2 or SMM2, I could sure use some help with a dimension. I'm going to be placing this mill with the back of it up against a wall. There is a door on the back of the machine which needs to be accessible. To access the back of the machine I'm going to be putting a door in the wall that it will be backed up against. What I need is the length from the leftmost protrusion of the machine on the left side to the beginning of the door opening on the back of the machine. Once I have this I can cut the hole in the wall for the new door.
My local HFO can't seem to find this information anywhere. Anyone out there with a machine and a tape measure that could help?