OUTSOURCE CNC PROGRAMMING SERVICE

Do you have a cnc programmer on vacation and need a program
right away .Need some fill in during employee replacement. Or do you have a
program overload ,and need help in the short term .Perhaps you want to take more
work on .Maybe I can help.
I have 25 years of cnc programming and setup experience in the
aerospace and electronics industry.I can program 2,3 axis machines and 4 axis
horizontals. Designing production work is my specialty, especially on horizontals.
Fixtures can be designed for your verticals or horizontals to match your tombstones.As previously stated
I have 25years of experience setting up machines, and have a good instincts on
on what speeds ands feeds to use on a job..Below is my contact information if you have a Quote or any Questions.


Cnc programming Software
: Surfcam
:Vericut-(to verify gcode)

I will use the following data to produce your parts.

:Cad-iges,dxf,step
:Prints-3d modeling from blueprint.Scanned if possible
: Sketches
:cmm-data
:catia version4 .model

CONTACT:AL

[email protected]