Hello everyone.
I am a new member and I am wondering if someone can help me out with a little information. I am currently working with a Multicam 2000 Laser and just before starting a new program the "Fault" light came on on the main counsole. I have talked with Multicam and the rep I have talked with is unable to tell me why it is on and what it might mean. If anyone might have a sugestion or a reason please let me know. Thank you.
Results 1 to 2 of 2
-
09-05-2009, 03:37 PM #1
Registered
- Join Date
- Sep 2009
- Posts
- 1
New member with a "Fault Light" question.
-
09-05-2009, 04:32 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24221
If I were you I would get on to the rep to find out the answer, if he does not know, obviously he should be in touch with some one who knows the reason it was put on the machine!
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Similar Threads
-
"Unnormal" light on HF 47158?
By Fast01 in forum Benchtop MachinesReplies: 5Last Post: 07-22-2009, 05:25 PM -
Fanuc 18i-T "1114 main spindle orient fault"
By Jeff_Mezzo in forum FanucReplies: 3Last Post: 01-29-2009, 03:30 AM -
Did Anyone hear of "Spectra Light Mill Control"??
By CNCNR in forum Uncategorised MetalWorking MachinesReplies: 2Last Post: 01-23-2008, 12:28 AM -
"amplifier fault on axis" on fadal VMC 15
By siquedude in forum DNC Problems and SolutionsReplies: 0Last Post: 11-21-2007, 12:11 AM -
V2XT error message "DRIVE FAULT detected (0,z,y,x) check log"
By rfdoyle in forum Bridgeport / Hardinge MillsReplies: 4Last Post: 10-08-2007, 09:35 PM
Posting Permissions
