[Haytham]

Hi all,
I am having problems to run CNC router for glass engraving,
Its a Chinese make cnc machine model SKS-1224L.
Have installed the NC studio also connected the machine,
all was going well till the time the spindle started, and the machine started moving in -Z & -X direction and banged to the frame.
have stopped working as the machine is started the spindle starts rotating and dashes to the side frame.

Have been struggling through this from past 5 days,
have tried re installing the NC studio but no success,

plz help as i cannot start the machine as the spindle starts and hits the machine frame so have to do it in off condition....

Its seems like you have a problem with the limit switches, this video may help you to deal with them.