I am trying to find out jumper settings to inhibit Fanuc drives using a Camsoft/Galil 1840 motion control card with a 1900 I/O connection breakout box. The drive # for the jumper settings is A06b-6035 class and the top board is A20B-004-017. Anyone with any information on the jumper settings would be very helpful.
Results 1 to 2 of 2
-
03-07-2005, 09:12 PM #1
Registered
- Join Date
- Mar 2005
- Posts
- 1
Quesion regarding inhibit jumper settings for Fanuc drive
-
03-08-2005, 12:43 AM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24221
Are you refering to the enable pin on the drive connector? I have the Honda plug pin out for the CN2 connector on A06B-6045 drive, the enable pin on these is pin 2 (enbl), the 6045 might be the same.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Posting Permissions
