[debogus]

My gallery


Yee Hoo it made something.
Cutting board slides on cheap ace hardware zinc plated rods for Y and Z
skate board bearings on C channel for X
Driven by Xylotex

Like I've read . Dont dwell so much on the planning that you dont start.

Started 45 days ago with a piece of all thread and half a clue. It just happened.

Dave:cheers:

[ynneb]

Good on you Dave.

Its such a nice feeling when you see that all that hard work you put in, actually pay off.

Fantastic effort.

[Ken_Shea]

two thumbs up Dave, You may have set a record here at 45 days

Anyone beat that on a functioning CNC mill ?


I like your quote, I should read it more often

[joecnc2006]

got my 1st parts feb. 8, 2005, finish build Feb. 20, 2005, then rebuilt linear rails to gas pipes and roller bearings finishe complete build and cutting by Feb. 26, 2005.

http://www.cnczone.com/forums/showth...?t=8432&page=1


I guess thats kinda fast? Next one will be planned out longer but built faster, all alumn. construction.

[Hobbiest]

Nice job! I am glad that somebody finally used that channel idea that I had ages ago, or had the same idea anyway (I am not one of those guys that thinks I am the only one that can see something one way...no, not talking about anybody indparticular!).

Like I've read . Dont dwell so much on the planning that you dont start

Sounds like youv'e been reading too many of Benny and my posts!

Cheers mate

[debogus]

Thanks ,
This router was just built by watching this web site and drawing ideas on paper .No real plans. See a machine here make a little sketch, go to
ace hardware buy stuff :stickpoke
The x axis was built faster than any stage .

At first I was going to use 1" x 1/8 bar stock but had one that wasnt straight, we're back at the store they are out of that size , then I see that chanel ,ohhhh.
Dont know how long it'll last ,but its straight

I thought to get to this stage it would be so hard and expensive .
This site has so much information and usefull ideas, that it makes this possible ,Thankyou .


Dave