Does anyone know how I can check if my machine with Meldas 330HM-V is equipped with Rigid Tapping option?
Results 1 to 3 of 3
-
09-30-2009, 05:08 PM #1
Registered
- Join Date
- Jun 2009
- Posts
- 11
Rigid Tapping with Meldas 330HM-V?
-
10-01-2009, 05:20 PM #2
Registered
- Join Date
- Jun 2006
- Posts
- 25
Rigid tap
The best way would to try it. Just cut air to test it out at first. Turn on control parameter #29. Test this:
G91G84X0Y0R-.5Z-1.E13S200.;
G80;
M30;
The spindle and Z axis should start at the same time and the movement should be smooth with the Z axis at the beginning and end of the stroke. The spindle will not turn on until it is at the R-plane, then accelerate with the Z axis.
-
10-01-2009, 05:34 PM #3
Registered
- Join Date
- Jun 2006
- Posts
- 25
rigid tap
I just noticed your location as Mexico. If you are doing metric threads then try this for the program: G84G98X0Y0R-12.5Z-25.F1.5S200;
G80
M30
The F is the pitch. The E is for threads per inch.
Reply With QuoteSimilar Threads
-
What exactly is Rigid tapping? Why people always ask does it do rigid tapping?
By cjchands in forum MetalWork DiscussionReplies: 24Last Post: 05-01-2014, 07:02 AM -
tapping on a mini mill without rigid tapping???
By mls in forum Haas MillsReplies: 13Last Post: 07-04-2009, 12:43 AM -
Tapping head or rigid tapping
By Gregory_C in forum Syil ProductsReplies: 2Last Post: 10-18-2008, 06:49 AM -
Rigid tapping on Meldas MO
By cut more in forum Mazak, Mitsubishi, MazatrolReplies: 6Last Post: 05-01-2008, 11:39 AM -
Rigid tapping or tapping head
By kentavv in forum Charter Oak Automation Support ForumReplies: 7Last Post: 09-24-2006, 06:08 PM
Posting Permissions
